STILL RX 60 2,5 – 3,5 t

Safety in the warehouse is increased thanks to an acoustic signal during reversing. Colleagues are therefore able to notice the forklift truck even if they have their back to it.

The broadband alarm is an audible alarm that emits a broadband signal tone. Over longer distances, the tone is drowned out by ambient noise. However, in the immediate environment the noise and thus the source of danger are very easy to locate. This increases awareness of the truck and prevents accidents.

Bracket systems protect drivers thanks to their stable structure and assembly within the truck contour. We also offer fitting and retrofitting for trucks with a rear windscreen. This does not restrict the freedom of movement or the all-round visibility of the driver, nor does it make getting on and off the truck more difficult. The manual system can be opened and closed by hand. The automatic system is coupled with the hand brake or accelerator pedal, and closes the bracket as soon as the truck begins to move.

The protective grille roof is available in a low or high version, according to the height of the passageways. It protects the driver from falling loads.

The wireless collision avoidance protects drivers, employees and trucks from dangerous situations, even without visibility. The system requires the truck to be pre-fitted with a set of antennae, a driver interface and a connection to the vehicle controller. It allows trucks, pedestrians and stationary wireless modules (e.g. on doors, entrances, hazard points) to communicate with each other. When trucks approach pedestrians, both parties receive an optical and acoustic warning (warning zone). In case of dangerous approaches (protection zone), they are alerted and interventions in the operation (braking) may be triggered. It therefore prevents ‘vehicle to pedestrian’ and ‘vehicle to vehicle’ collisions.

Keeping the goods in place: the load backrest stabilises the transported goods at the fork carriage back so that they can be securely transported from A to B.

Rear Area Monitoring with Intelligent Object Detection

The Reversing Assistant Plus is a camera-based assistance system designed for safe reversing. It displays the rear surroundings on the monitor and reliably detects people and objects.

• 3D camera with real-time display of the rear area
• Automatic distinction between people and objects
• Visual alerts and acoustic warnings in hazardous situations
• Context-based responses such as warning sounds or driving interventions
• Support for safe maneuvering in tight or unclear spaces

Safe reversing thanks to automatic warning

STILL Sentry protects people and objects behind the vehicle while reversing. The radar-based system reliably detects obstacles and warns the driver in time.

• Rear area monitoring via radar sensor
• Detection of objects and people within a customizable monitoring zone
• Acoustic warning signals and visual alerts in hazardous situations
• Increased safety when rear visibility is limited Ideal for operations involving frequent reversing or confined spaces

Buckled up? If not, the seat belt control ensures that the driving speed is automatically reduced. In cab trucks, the system only engages when the cab door is open.

If desired, you can limit the usage of your forklift truck to specific persons or groups of persons via access authorisation. Select whether the release of the truck should be carried out using a key switch or via a digicode system with ten configurable access codes (or PINs).

Digicode systems (PIN) are an easy way to prevent unauthorised use of the truck. The truck can be started up quickly and easily, simply by entering the PIN code. This allows the user to limit access authorisation to specific individuals or groups. It is possible to configure up to ten PIN codes.

Optimal visibility at all times: the optional panoramic overhead guard with armoured glass window provides improved visibility when storing and retrieving goods. It works entirely without the need for struts and of course meets all the safety standards of a standard overhead guard.

With Dynamic Load Control, you can ensure smooth, safe and efficient lifting operations by precisely detecting loads and lifting heights and automatically adjusting the hydraulics. Depending on the vehicle, different variants of the DLC are available to you. Increase productivity and safety - for fewer risks and optimum performance in daily use!

Fulfills lifting height requirements at the push of a button:

Whether the racks are to be filled or emptied - you know the game: look closely, extend the mast, maintain concentrated eye contact, stop the mast, readjust if necessary. Several times. In every shift. On every day. Now imagine that you could leave your sense of proportion behind. Imagine you could just press a button and wait for the forks to float to exactly the right height and stop there automatically. Imagine: You can. With the STILL lift limiter, the forks automatically stop at up to three programmable intermediate lift heights. And to ensure that your profitability, but not your trucks, goes through the roof, the maximum lift height can also be permanently programmed.

With the help of the optional LED lift height sensor (standard on the FM-X), the lift height display ensures maximum precision from the very first millimetre. This means that operators always know the height of the fork tips and can navigate precisely to avoid touching the rack when picking up the pallet. The system works with a repeatability of less than +/- 5 mm and the lift height is permanently shown to the drivers on the display.

The ceiling sensor detects low ceiling heights and prompts the driver to reduce their speed in order to promote general work safety in the warehouse. It comprises an ultrasonic sensor on the roof of the truck, which detects ceilings up to a height of 20 m. Depending on the sensor signal, the maximum speed is controlled, whereby the standard speed is 6 km/h.

The right driving programme for all requirements: the operator can choose between three established and two freely configurable driving programmes in the three operating modes: Blue-Q, normal and sprint mode. The driving programmes can be chosen according to the situation in order to achieve the maximum performance or energy efficiency.

Intelligent autopilot: the forklift’s Blue-Q (blue button) efficiency mode is activated at the touch of a button. An intelligent optimisation characteristic in the drive saves energy precisely where it is not impacted by the work process.

Up to 10% savings in energy consumption depending on the use profile and forklift equipment.

And everything is on the right track:

Safe and undamaged vertical parking or storage of goods: This is exactly what you can do from now on at the push of a button with the mast vertical position assistance system. Once the system is activated, all you have to do is tilt the mast forwards. As soon as the mast is in the upright position, it stops automatically. This means that you always get the goods to the floor in one piece and store them on the shelves more quickly, easily and safely.

Overload excluded:

If the forklift can still handle this load? A question that can quickly lead to injuries, vehicle or goods damage. Fortunately, there is overload detection. The system monitors the weight of the load and any attachments and always gives you a safe and clear answer. What's more, if the total weight exceeds the rated capacity or the set maximum load, the system actively intervenes and reduces the lifting speed. If the threshold value is exceeded by more than 10 percent, the lifting function is completely blocked. This means that the driver, vehicle and goods are always optimally protected.

The driver can see the tilt angle of the mast on the display. They therefore always have the highest degree of control over the loaded goods. The function is a real help during storage and retrieval as well, as the operator is able to precisely check if the forks are holding the pallet correctly.

The wireless zone detection promotes general work safety thanks to automatic speed reduction in certain areas or by opening doors when a truck is approaching. It comprises a wireless system (incl. antennae set, driver interface and connection to the vehicle controller), which allows the truck, pedestrians and stationary wireless modules (on doors, entrances and hazard points) to communicate with each other.

Autostop before ground contact:

When forks hit the ground, it's not pleasant for the ears, the floor or the forklift. But on the other hand, would it not be very pleasant if this would not happen in the first place? That's exactly why we developed the electric fork wear protection for you. When the assistance system is activated, it ensures that the forks cannot touch the ground during lowering. Shortly before that, they stop automatically - exactly so that you can thread them perfectly into the pallet. Forks dragging on the ground due to accidental startup in the lowered state are also a thing of the past.

Quiet lifting!

Strength lies in peace - this now also applies to your forklift trucks. Because the Silent Lift assistance system puts an end to noise during lifting and lowering operations. Smooth lift transitions, smooth storage and retrieval on the top shelf level, and an automatic stop of the forks before they hit the floor - all this promises you heavenly peace and quiet even when lifting and lowering the heaviest loads.

The automatic parking brake is applied automatically or at the push of a button, and prevents the truck from rolling. The electrohydraulic spring-loaded brake locks whenever the truck stops.

Equipping forklift trucks with a fire extinguisher can help prevent the risk of fire. This should be clarified as part of the risk assessment. This enables fast and direct action in case of fire, thus preventing major damage.

Windows can be broken with the emergency hammer provided.

Better view of the load – more control at height

The fork tip camera system improves visibility of the load – especially at high lift heights. The camera is integrated directly into the fork tip and transmits the image to the driver’s monitor.

• Direct view of the load during loading and unloading
• Optimal control when working at great heights
• Reduced damage to goods and racking
• Camera safely integrated into the fork tip
• Real-time transmission to the in-cab display

Forks up, speed down:

More safety, less product breakage and ensuring proper vehicle use - these are the benefits offered by the Speed Reduction assistance system when the fork carriage is raised. As soon as the forks reach a height of 500 mm (or another defined threshold), the speed of the vehicle is automatically reduced. Even if a driver forgets that he should not drive with the load raised, the assistance system slows him down, guaranteeing safe handling of the load and vehicle.

The integrated horn is located on the handle to the rear of the overhead guard. The horn signal sounds at the push of a button. Thanks to this simple and ergonomic method of signalling, when reversing the driver can warn pedestrians in the area that the truck is approaching.

The panoramic mirror, which can be mounted on the left or right side of the truck, improves visibility and reduces the size of the blind spot by expanding the field of vision. Drivers are able to get a quick overview of what’s behind them, allowing them to work more safely.

More safety, more comfort: the optional positioning laser projects the fork height with a green laser line on the carrier, thus serving as a visual extension of the fork. This facilitates orientation when storing and retrieving goods, as well as increasing both the handling capacity and the degree of safety. The positioning laser can be easily switched on and off at the touch of a button and poses no threat to the naked eye.

The reversing light is a long, multi-coloured light on the back of the truck, which automatically emits a constant red light during forward travel and switches automatically to a flashing white light when the truck is in reverse.

The reversing light increases the visibility of the truck and thus reduces the risk of accidents as other traffic and pedestrians are able to easily identify the direction of travel.

The light, which is protected by a U-shaped frame, is anti-glare and can be attached to various points on the truck.

Safe operation at all times: the LED daytime driving light ensures that the forklift truck is always clearly visible even in darker areas. A daytime driving light is available for various trucks.